Cisco Vpn Client Windows 10

  1. Cisco Vpn Client Windows 10 Fix
  2. Cisco Vpn Client Windows 10 Regedit

Launch the Cisco AnyConnect Secure Mobility Client from the Start Menu. Step 9: The first time you launch the client, enter ''. To establish a secure VPN connection, click Connect.

Learning has never been so easy!

If you have upgraded from Windows 7/8 and need to install the Cisco VPN client then you can use the following instructions on how to cleanly install it or fix a bad install of it after upgrading to Windows 10.

7 Steps total

  • VPN from Windows 10 Client to Cisco RV325 SOHO Router. I can connect to my home network, which is behind a Cisco RV325 router, from iOS via a VPN without any problem (well, it took a long time to figure out what the various configuration parameters of IPSec were, but after I did it was easy). I use a pre-shared key.
  • Users who just upgraded to Windows 10 from an earlier Windows version, will need to first uninstall their SonicWALL VPN Client & Cisco VPN client, then proceed with the instructions below. Download and install the SonicWALL Global VPN Client from’s Cisco Tools & Applications section.

Step 1: Uninstall Cisco VPN Client if it was already installed


Uninstall Cisco VPN client from the PC. (If you get and error trying to uninstall, you may need to install DNE updater first)

Step 2: Uninstall DNE updater software

Uninstall any DNE updater software that may be installed. After uninstalling run a registry clean (you can use CCleaner if you like). Then reboot your PC.

Step 3: Run Winfix.exe

After reboot run Winfix.exe from here.
After you run the cleanup reboot your PC again.

Step 4: Install Sonicwall VPN client

SonicWall VPN is will install the DNE service that will work with Windows 10. Install the SonicWALL VPN found here. and then reboot your PC.

(You do not need to launch the SonicWALL client, merely installing the client will install the proper DNE services)

Step 5: Reinstall/Install Cisco VPN client version

Download latest Cisco VPN client from Cisco or from here
Extract the zip file to a temp location (uncheck run exe after extraction).
Navigate to the temp folder and run the MSI installer (not the exe) to install the VPN client. Reboot the PC

Step 6: Apply Registry fix.

•Open regedit
•Browse to the registry key HKLMSYSTEMCurrentControlSetServicesCVirtA
•Select the display name to modify:
•x64 - '@oem8.ifn,%CVirtA_Desc%;Cisco Systems VPN Adapter for 64-bit Windows' to 'Cisco Systems VPN Adapter for 64-bit Windows'
Reboot your PC.

Step 7: Launch Cisco VPN client to ensure that it lauches.

After you verify that the VPN client launches you can then uninstall the SonicWALL VPN client and you should be able to once again use the Cisco VPN client.

Published: Aug 18, 2015 · Last Updated: Aug 19, 2015


  • Fix found at Gleescape


Well, this is true, however, there is a way around this by using our guide below:


First of all you need to download our VPN fix package for Windows 10 which you can download using the link below:

You also need to ensure that you have the Cisco VPN Client installer. Once you have these you should extract the VPN fix package which will give you the following utilities:

Cisco Vpn Client Windows 10 Fix

    • WinFix.exe - Windows Fixup for DNE

    • DNEUpdatex86.msi - DNE Updater for x86 Operating Systems (Provided by Citrix)

    • DNEUpdatex64.msi - DNE Updater for x64 Operating Systems (Provided by Citrix)

    • CiscoVPNClientFixx64.exe - Cisco VPN Client Fix for x64 Operating Systems (Provided by TechyGeeksHome)

    • CiscoVPNClientFixx86.exe - Cisco VPN Client Fix for x86 Operating Systems (Provided by TechyGeeksHome)

You have to run these utilities in a particular order to enable this to work. So, identify the architecture of the operating system you are using, for this guide we will use x64.

Cisco Vpn Client Windows 10 Regedit

Run the WinFix.exe utility first and you will be presented with a box like this: