To install this package please do the following:
- Make sure that all system requirements are met.
- Save the downloadable package on an accessible location (such as your desktop).
- Locate and double-click on the newly-downloaded file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.
About Mouse Packages:
I have a HP dv7 1444us and one finger edge scrolling still does not work with this driver. It worked fine in Windows 8.1 and in fact the driver from 8.1 (188.8.131.52 October 13, 2011) is what I am now using in Windows 10 and edge scrolling works fine.
If an appropriate mouse software is applied, systems will have the ability to properly recognize and make use of all the available features. This will also allow users to configure any additional buttons.
In case you want to apply this software, all you have to do is to make sure all computer characteristics are compatible (such as operating system and bit architecture), get the package, and extract it if necessary. Afterwards, run the available setup, and follow the on-screen instructions for a complete and successful installation.
However, bear in mind that other platforms might be compatible as well, but we do not recommend applying any release on operating systems other than the highlighted ones. Also, even though not always necessary, it is best to take into account a system restart as well.
This being said, if you wish to install this version, download and apply the package, and install it on the system. Also check back with our website whenever possible, to stay up to date with latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- COMPATIBLE WITH:
- Windows 10 64 bit
- file size:
- 2.9 MB
- Keyboard & Mouse
Razer mice are widely users among users. But it is unavoidable that your Razer mouse, such as Razer Naga mouse, stops working on Windows 10. Or for some users, Razer Synapse is not detecting the Razer mouse. And to a great extent, Razer Naga mouse driver is the most to blame for the malfunctioning Razer mouse.
Therefore, no matter you are using Razer Naga Chroma, Trinity, Hex, etc. you are supposed to update the Razer Naga drivers for Windows 10. That can also make sure you are enjoying the enhanced performance of the mouse and fix Razer mouse not responding when plugged in the USB port.
How to Update Razer Naga Drivers for Windows 10?
You can refer to the following methods to download or update Razer Naga Chroma driver, Hex driver, Epic driver, and any other Razer mouse driver.
Here if you are trying to update Razer Naga mouse driver in the hope that Razer mouse problem can be solved, it is necessary to check both the USB port and the Razer mouse in case it is a hardware error. Otherwise, go ahead to download the latest Razer Naga drivers on Windows 10.
Method 1: Update Razer Naga Mouse Driver Automatically
If you feel it troublesome to find and then download Razer Naga driver by yourself, it is strongly recommended to get the most of Driver Booster, the top one driver updater to automatically install Razer Naga drivers.
Driver Booster will scan, download, and install all the missing, outdated, and even faulty driver on your PC. If there does exist any incompatibility or corruption in your Razer Naga mouse driver, it will let you know after the scan.
1. Download, install and run Driver Booster on Windows 10.
2. Click the Scan. Driver Booster will give a comprehensive scan for all the device drivers.
3. In the search result, find out Mice and other pointing devices and then Update the Razer Naga driver.
You can see how quickly Driver Booster helps you download and install the Razer Naga Chroma driver, Trinity driver, etc. Here it makes sense to download Razer drivers using Driver Booster, not restricted to Razer Naga mouse drivers.
Method 2: Update the Razer Naga Driver in Device Manager
All Drivers For Windows 7 Free Download
If you tend not to utilize any third-party tool, Windows embedded Device Manager may help you with downloading or updating Razer mouse drivers for Windows 10.
1. Go to Device Manager.
2. Expand Mice and other pointing devices, and then right click the mouse driver to Update driver.
3. Then let Device Manager Search automatically for updated driver software.
Now, Device Manager is searching online for the latest mouse driver on Windows 10. If there is any, it will install the updated driver for you. In this sense, perhaps Razer Synapse not working will also be removed.
Method 3: Update Razer Naga Driver Manually
Thirdly, there is a big chance that most drivers for Razer products can be found on Razer Support, like Razer mouse, keyboard, Audio device, etc. So, if you are patient and skillful enough, it can be a good choice to download the latest Razer Naga driver on your own.
1. Head to Razer official site.
2. On Razer site, pick out Raze mice from the Category list.
3. Then select Razer Naga(s) from all the Razer mice.
4. Choose which Razer Naga mouse driver you want, such as Razer Naga Trinity driver and Epic Chroma driver.
Follow the on-screen instructions to finish installing Razer driver and Razer Synapse software to manage the Razer devices.
How to Fix Razer Naga Mouse Issues on Windows 10?
For some users, even if you downloaded Razer drivers for Windows 10, the mouse has no response anyway. Under this circumstance, perhaps it is high time that you troubleshot this mouse not working error.
Available and Useful Solutions for Razer Mouse error:
Run Hardware and Device Troubleshooter.
1. Go to Start > Settings > Update & Security > Troubleshoot > Hardware and Device > Run the troubleshooter.
2. Reinstall Razer Synapse Software.
It is of great necessity to keep Razer Synapse working so as to use the Razer Naga Chroma, Epic mouse. So you would better uninstall the Razer software in Control Panel and then reinstall Razer Synapse. In this way, Razer mouse not connecting to Razer Synapse can be resolved as well.
All in all, with the help of this passage, you are able to get the hang of updating Razer Naga drivers on Windows 10. Therefore, if you feel like update any other Razer driver, just obey similar steps or methods.