Scanmaster Keygen Free

FVDI J2534 interface comes with a PS Push Switch which can turn this interface from J2534 mode to ELM327 mode. Here’s the guide to install ELM327 software ScanMaster ELM and PCMSCAN for FVDI J2534 adapter.

ScanMaster ELM V2.4.12

ScanMaster ElmScan is simple, easy-to-use, intuitive software for automotive diagnostics.

Scanmaster elm 2.1.104.771 keygen serial number: Today: 100%: ScanMaster ELM. ScanMaster-ELM:: 9%: Add to bookmark Add serials. Thank you for using our software portal. Vertex tools sketchup crack 2016 full. Use the link below and download OBD-II ScanMaster legally from the developer's site.

Multi-language: English, Dutch, French, Spanish

Key Features

  • Automatic, hands-off protocol detection
  • Real-time data, available in the form of tables, graphs, and gauges
  • Reads all generic and manufacturer-specific DTCs
  • Database of over 4200 generic DTCs, and over 3600 manufacturer-specific DTCs
  • Can be used to turn off the “Check Engine” light (MIL), and clear all emissions-related diagnostic information
  • Oxygen sensor test results
  • Continuous and non-continuous monitor test results
  • VIN, Calibration ID, In-Use Performance Tracking
  • Multi-language support: Croatian, Czech, Danish, English, Hungarian, Polish, Serbian, and Spanish.
  • Metric and English units of measure
  • Printable diagnostic reports
  • Data logging in CSV format
  • Dynomometer
  • Fuel gauge

PCMSCAN v2.1

PCMSCAN is a fully featured generic OBD-II scanner and diagnostic tool that supports a wide variety of OBD-II hardware interfaces. It allows viewing, charting, logging and playback of diagnostic data in real time via the vehicle’s OBD-II diagnostic data port. It also allows viewing of vehicle Diagnostic Trouble Codes (DTC’s), Freeze Frame data, and other vehicle information.

Language: English

  • Virtual Dashboards
  • Drag Strip and Dyno
  • Data Logging
  • Trouble Codes
  • Test Results
  • Miscellaneous
2.1

Main Steps:

Step 1: Install ScanMaster-ELM v2.1 software

Step 2: Install PCMSCAN V2.4.12 software

Step 3: Install FVDI J2534 driver

Step 4: Setup COM Port for ScanMaster-ELM

Step 5: Run PCMSCAN

Procedure:

Operating system: Windows 7 32-bit (You can test other systems)

Step 1: Install ScanMaster-ELM v2.1 software

Open Software CD or download software


Open ELM327 SCAN folder->ScanMaster-ELM327 v2.1 folder


Open ScanMaster-ELM327 v2.1 setup
Select setup language
Install ScanMaster-ELM setup Wizard
Accept license agreement
Select destination location
Select Start Menu folder


Press Install
Complete setup wizard. Download borland delphi 5 completo hot.


Click on Finish.


Open KeyGen

Open ScanMaster-ELM software on desktop
It will ask you enter Name and Company
Name:23123123
Company:2132313

Press Continue button

It will display a Install Code. Copy the code and paste to KeyGen

Press on Generate Key

Copy the generated key to ScanMaster-ELM327 register area, click on Register

Press Continue

1 keys registered

Software has been registered and activated.

Step 2: Install PCMSCAN V2.4.12 software


Open ELM327 SCAN folder->PCMSCAN v2.4.12 folder


Install PCMSCAN v2.4.12 setup
Install PCMSCAN installation Wizard
Accept license agreement
Choose destination location


PCMSCAN has been successfully installed.
Click on Finish
If you cannot find PCMSCAN software on desktop
Try click on Start->All Programs->PCMSCAN, send PCMSCAN software shortcut to desktop

Free


Open PCMSCAN software
Accept license agreement


Enter Registration code


Open PCMSCAN KeyGen, press Generate button. It will generate Customer ID and License key.


Copy Customer ID and License key to correspoding area
Press OK

PCMSCAN software is installed

Step 3: Install FVDI J2534 driver
Open software CD


Open FVDI_J2534_Ford_Setup
Select setup language


Select setup type: Full installation
Select all components should be installed
Select additional tasks: Install USB drivers and install VS2012 package

Installation complete.


Select no to restart computer now. Click on Finish.
FVDI J2534 driver installation completed.
Confirm LED is flashing with green color and PS switch button is pressed down.
Delete FVDI J2534 for Ford to Recycle Bin


Check Device Manager to make sure device is well connected with computer

Step 4: Setup COM Port for ScanMaster-ELM
Open ScanMaster-ELM v2.1 software on desktop


Select Interface Type: Serial(RS232 or Virtualk COM Port Driver), Port: COM6 and Maunually Set
Press OK


Click on Connect top make a connection with vehicle and computer
Now you can check Vehicle info, view System Status, read/clear Trouble codes, View Freeze Frames and check Oxygen Sensors, PID cofig, Live Data Graph, Actuator, live data grid etc

Step 5: Run PCMSCAN
Open PCMSCAN software on desktop


Click on Connect icon
Select diagnostic system: OBDII
Press OK
If software prompt no vehicle connected, check your connection, if yes, press OK to ignore


Now you can use PCMSCAN software to read/cl;ear trouble codes, data view,view freeze frame data, check Oxygen sensors, monitor status etc.

Scanmaster Keygen Free Download

Related posts:


- Regarding PC software this application is my favorite to use with ELM327 devices.

- Following the next video tutorial you will install without difficulty the complete application (with english subtitles soon).

- At the end of this article you will find a link to download the program. Remember that the password to unzip it is: obd2-elm327.es

- Once the ScanMaster program is installed, we will have to configure it properly. Logically for each version of ELM327 will be configured in a different way.

ELM327 USB version

- To do this we will set the type of interface 'Serial (RS232 or Virtual COM Port Driver), leaving the port in autodetect mode.


- If you don't know which communication protocol is used by the ECU of the vehicle it's advisable to leave it in automatic mode. However, it's always better if it can be specified, this information can be obtained from the database of compatible vehicles.

Scanmaster Elm Crack


- Once configured properly, it is only necessary to press the connect button and wait for the program to communicate correctly with the ELM327 device and this with the vehicle ECU. In the report of the screen will indicate to us all the steps that carries out.

ELM327 Bluetooth version

- In the following video tutorial you will find all the information necessary to link the device by bluetooth with the computer and then the correct configuration of the program ScanMaster (with english subtitles soon).

ELM327 WIFI version

- I'm working in it. Soon I will include the information needed for it.